# Operating Environment

[The J1600](/products/j1600/overview/.md) is designed for indoor, floor-to-floor transport. This page lists the environmental limits a site must meet, in both automatic and manual mode.

Preliminary specifications

These January 2026 specifications are preliminary and subject to change.

## Environmental limits[​](#environmental-limits "Direct link to Environmental limits")

| Parameter                            | Metric   | Imperial/other                                                       |
| ------------------------------------ | -------- | -------------------------------------------------------------------- |
| Gradeability, automatic mode         | 0°       | 0%                                                                   |
| Gradeability, manual mode, no load   | 2.86°    | 5%                                                                   |
| Gradeability, manual mode, full load | 1.72°    | 3%                                                                   |
| Maximum traversable bump height      | 25 mm    | 1 in                                                                 |
| Maximum traversable gap width        | 20 mm    | 0.8 in                                                               |
| Minimum operating temperature        | 5°C      | 41°F                                                                 |
| Maximum operating temperature        | 40°C     | 104°F                                                                |
| Relative humidity                    | 20–80%   | non-condensing                                                       |
| Floor flatness/levelness             | TR34 FM3 | FF 25 / FL 20                                                        |
| Ingress protection                   | IP21     | protected against objects over 12.5 mm and vertically dripping water |

## What the limits mean in practice[​](#what-the-limits-mean-in-practice "Direct link to What the limits mean in practice")

* **Automatic mode is a [level-floor application](/applications/planning/route-and-floor-suitability/.md).** With 0% automatic gradeability, slopes, ramps, and steep dock plates remain manual tasks. In [manual mode](/documentation/user-guides/manual-operation/.md) the vehicle climbs up to 5% unloaded or 3% fully loaded.
* **Small floor defects are tolerated.** Bumps up to 25 mm and gaps up to 20 mm can be traversed; the floor must meet TR34 FM3 (FF 25 / FL 20) flatness.
* **Indoor climate only.** IP21 protection and the 5–40°C, 20–80% non-condensing range rule out outdoor operation, cold stores below 5°C, and wet areas.

The division of labor follows from these limits: the operator handles dock plates, slopes, and irregular surfaces manually, and the robot automates the level-floor travel. See [Dual mode](/products/j1600/dual-mode/.md) and [Applications](/products/j1600/applications/.md) for fit guidance.

## Real-world validation[​](#real-world-validation "Direct link to Real-world validation")

The company validates the J1600 at its [Copenhagen demo and test area](/company/locations/test-and-demonstration-facility/.md) under intentionally real-world conditions, including uneven flooring, water-filled test loads, and multiple test setups. The limits above still apply to production deployments.

## Related pages[​](#related-pages "Direct link to Related pages")

* [Technical specifications](/products/j1600/technical-specifications/.md) — the master data table.
* [Pallet and load compatibility](/products/j1600/pallet-and-load-compatibility/.md) — the load envelope that applies alongside these site limits.
* [Navigation and obstacle avoidance](/products/j1600/navigation-and-obstacle-avoidance/.md) — how the robot handles dynamic obstacles within a compliant site.
